1. The factory combination is set at “0-0-0”.
2. The combination must be set on the factory number prior to resetting.
3. On the underside outer edge of the lock there is a hole for the code reset button. Rotate the face of the cam until the code reset button comes into view.
4. Depress the pin with a paper clip and keep it pushed in...
5. Set your personal combination by turning dials to the desired combination digits.
6. Release the reset button and your combination is set.
7. To lock, rotate lock to “locked” position. Rotate one or more digit dials after lock is closed. To open lock, turn dials to personal combination.
Note: if desired, the lock can be installed as a non-resettable combination. Take off the screw to the cam and remove the cam and “stop cam”. Rotate cylinder 180 degrees & put “stop cam” and cam back on.