Storage
      Back to home
      1. Knowledge Base
      2. Accessories
      3. Storage

      Instructions: Top Drawer for Apollo 40 / 52

      Step-by-step instructions to install your INOVATIV Top Drawer for Apollo 40 / 52 workstation cart.

      Box Contents:
      1. Hideaway Latch 6. 18" Length Non-Easy Close
      2. Drawer Locking Block 7. 18" Drawer Side Bracket
      3. Long Lock Stop 8. (5x) 1/4"-20, 1/2" Long BHA Bolt 
      4. Single Top Drawer 9. (6x) 1/4"-20, 5/8" Long BHA Bolt 
      5. Combo Lock with Large Cam Plate 10. 1/4"-20 Nylon Locknut

      Screen Shot 2024-10-28 at 2.51.56 PM

      NOTE: DO NOT PULL CARPET BACK TO ACCESS HOLES. 
      POKE HOLES THROUGH CARPET USING SHARP POINTED TOOL.

      Apollo - TopDrawer_1TD40_Mount
      Looking at the bottom of the Apollo 40 Top Tray. (above)

      Apollo - TopDrawer_1TD52_Mount
      Looking at the bottom of the Apollo 52 Top Tray. (above)

      Setting the Combination Drawer Lock

      1. The factory combination is set at “0-0-0”.

      2. The combination must be set on the factory number prior to resetting.

      3. On the underside outer edge of the lock there is a hole for the code reset button. Rotate the face of the cam until the code reset button comes into view.

      4. Depress the pin with a paper clip and keep it pushed in.

      5. Set your personal combination by turning dials to the desired combination digits.

      6. Release the reset button and your combination is set.

      7. To lock, rotate lock to “locked” position. Rotate one or more digit dials after lock is closed. To open lock, turn dials to personal combination.