Storage
      Back to home
      1. Knowledge Base
      2. Accessories
      3. Storage

      Instructions: Top Drawer for AXIS WorkSurface Pro

      Step-by-step instructions to install your INOVATIV Top Drawer for AXIS WorkSurface Pro.

      Box Contents:

      (1) Top Drawer (Combo Lock and Sides Installed)  (2) Drawer Slides (Receiver Side)
      (1) Lock Stop and 1/4-20” x 1/2” Button Head Allen (6) 8/32 x 5/16L and Keep Nuts

      Screen Shot 2024-10-28 at 2.35.21 PM

      1. Attach the Drawer Slides (Receiver Side) to the inside of the WorkSurface Pro frame supports.

      2. 8/32 x 5/16L screws must be on the inside of the receiver rail.

      3. The Keep Nuts must be on the outside of the WorkSurface Pro frame supports.

      Screen Shot 2024-10-28 at 2.37.21 PM

      4. Align the drawer with the Drawer Slides (Receiver Side) under the WorkSurface Pro. Once aligned, push the drawer inward, connecting the drawer slides together. 

      Screen Shot 2024-10-28 at 2.37.47 PM

      5. Once the drawer is connected, add the Lock Stop to the underside of the WorkSurface Pro, attaching it using the (1) 1/4-20” x 1/2” Button Head Allen.

      Screen Shot 2024-10-28 at 2.38.20 PM

      SETTING THE COMBINATION DRAWER LOCK

      1. The factory combination is set at “0-0-0”.
      2. The combination must be set on the factory number prior to resetting.
      3. On the underside outer edge of the lock there is a hole for the code reset button. Rotate the face of the cam until the code reset button comes into view.
      4. Depress the pin with a paper clip and keep it pushed in…
      5. Set your personal combination by turning dials to the desired combination digits.
      6. Release the reset button and your combination is set.
      7. To lock, rotate lock to “locked” position. Rotate one or more digit dials after lock is closed. To open lock, turn dials to personal combination.