Step-by-step instructions to get started with your INOVATIV AXIS WorkSurface Pro.
Box Contents:
| (1) Worksurface Pro Assembly | (1) vDrop Assembly |
1. Attach vDrop assembly to compatible stand, tube, or post.
2. Once you have connected the vDrop assembly to your stand, tube, or post, make
sure to unlock the index pin before installing the AXIS WorkSurface Pro.
3. Install WorkSurface Pro onto the vDrop assembly.
4. Lock the index pin to secure the WorkSurface Pro in place and to protect it from unwanted disengaging.
Suggestion:
If you mount the vDrop assembly to the stand, measure (38 1/2”) from the top of the vDrop assembly to the ground with a tape measure to align the WorkSurface Pro approximately 41” from the ground. 41” is the standard for a working desk height, but the AXIS allows a bit more adjustability depending on your preference.
